Unidrive HS30
0 – 3,000 Hz Open Loop
0.25 kW – 7.5 kW (0.33 hp – 10 hp)
200 V / 400 V
Unidrive HS30 is designed for applications that require cost effective integration into safety systems and incorporates dual Safe Torque Off and advanced Rotor Flux Control (RFC-A) of open loop induction motors.
♦ Features
Conform to safety standards, maximize uptime and reduce costs by integrating directly with safety systems
- HS30 has integrated dual STO inputs for SIL3, PLe conformity, eliminating the need for external safety components
Improve throughput with advanced open-loop motor control algorithms
- Rotor Flux Control (RFC-A) gives maximum stability and control of induction motors at all powers.
- 180% motor overload suitable for heavy industrial machinery applications
Flexible system integration with SI communications options
- HS30’s SI interface enables integration with a wide range of available industry standard fieldbuses and I/O
Install and configure quickly and easily
- Simple fixed LED keypad
- Useful parameter guide located on the front of the drive
- Use Unidrive M Connect or an SD card with the AI-Backup adaptor to clone and transfer parameter sets
- DIN rail mounting is supported below 1.5 kW
♦ Specifications
Key data
- Heavy Duty rating: 0.25 – 132 kW (0.33 – 179 hp)
- Supply phases:
- Size 1 to 4: 110 V drives – 1 phase, 230 and 400 V drives – 1 or 3 phase
- Size 5 upwards: 3 phase
Standard features
Machine safety:
- 2 x Safe Torque Off terminals
Keypad:
- Fixed LED
Option slots:
- 1 (Size 2 and above)
Parameter cloning via:
- PC tools
- SD card with AI-Smart Back Up
- AI-Smart Adaptor
 |  |
*Additional fixings required to maximize security
♦ Options
Keypad
 | Remote keypad All the features of the CI-Keypad LCD, but remote mountable. This allows flexible mounting on the outside of a panel and meets IP66 (NEMA 4) |
System Integration Modules – Communications
 | SI-PROFIBUS PROFIBUS interface module |
 | SI-DeviceNet DeviceNet interface module |
 | SI-CANopen CANopen interface module. |
 | SI-Ethernet External Ethernet module that supports EtherNet/IP and Modbus TCP/IP |
 | SI-EtherCAT EtherCAT interface module |
 | SI-PROFINET RT PROFINET interface module |
System Integration Modules – Additional I/O
 | SI-I/O Extended I/O interface module to increase the number of I/O points on a drive |
Drive interface units – Back-up
 | AI-Back-up Adaptor Port adaptor for SD card parameter cloning, and an input for 24 V back-up |
 | AI-Smart Adaptor Has a built-in memory for parameter cloning, and an input for 24 V back-up |
Drive interface units – Communications
 | AI-485 Adaptor 24 V Port adaptor that allows the drive to communicate via RS485. Includes an input for 24V |
 | CT USB Comms Cable The USB Comms cable allows the drive to connect to a PC for use with Unidrive M’s PC tools* |
* Also requires an adaptor.
♦ Software
Commissioning and monitoring software
 | Unidrive M Connect – Commissioning tool Based on Control Techniques’ 25 years’ experience, Unidrive M Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance |
Automation and motion programming software
 | Machine Control Studio – Programming toolControl Techniques’ Machine Control Studio provides a flexible and intuitive environment for programming Unidrive M’s new automation and motion control features. |
♦ Downloads
Contact Details:
Công Ty Cổ Phần Kỹ Thuật Tự Động Song Nguyên
Trụ sở chính: 110/32/5 Tô Hiệu, P.Hiệp Tân, Q.Tân Phú, Tp.Hồ Chí Minh.
Chi nhánh: 47/17 Ao Đôi, Khu phố 10, P.Bình Trị Đông A, Q.Bình Tân, Tp.Hồ Chí Minh.
VPDD: số 180/2, đường DT848, ấp Khánh Hoà, xã Tân Khánh Đông, TP Sa Đéc, Đồng Tháp.
Hotline: 0903 907 698
Hỗ Trợ Kỹ Thuật: 0902 992 786
Fax: (028) 38 164 028
Email: info@songnguyen.vn
Website:http://songnguyen.vn
