• Fan & pump macros, plus onboard logic functions
• Water hammer control, and catch a spinning motor
• On-board Fire Mode
• mproved energy efficiency during low demand

• On board PLC & PID functionalities for advanced control without the cost and footprint of an external controller.
• Energy efficiency and optimal control for increased Coefficient of Performance (CoP

• Maximum control for conveyors with S-ramp acceleration/deceleration profiling and RFC-A automated load control
• Efficient control of mixer applications and up to 200% overload
• Closed-loop control for cranes and hoists for precision accuracy
• Reliability and control for crushers
• Precision and repeatability for extruder applications
• High energy efficiency and torque control for tunneling and drilling applications and up to 200% overload

• Onboard real-time multi-protocol Ethernet
• 1 x Safe Torque Off (STO) certified to SIL3/PLe
• Analog and digital I/O

• Designed to match Control Techniques’ highly popular Unidrive SP feature-set.
• Modbus RTU over RS485 communications
• 1 x STO certified to SIL3/PLe
• Analog and digital I/O

• Onboard real-time multi-protocol Ethernet
• 2 x STO certified to SIL3/ PLe
• Digital I/O – If analog I/O is required, this can be provided by an SI-I/O option module.

• Optimum energy efficiency for fan, pump and compressor applications.
• Powerdrive F300 works with permanent magnet or induction motors to deliver the most efficient performance and highest energy savings for fan, pump and compressor applications.

C = IP54 – Air inlet grill filters

EMC filter to meet generic emission IEC 61000-6-4 or operate in the First Environment

Remove MOV protection for use on un earthed supplies

B – Main switch with undervoltage release coil 24 VAC (MN)

C – Main switch with shunt trip voltage release coil 230 VAC (MX)

D – Main switch with shunt trip voltage release coil 24 VAC (MX)

2 x auxiliary contacts on main switch – supply and wiring

Plinth 200mm. Standard plinth is 100mm

Alternative 180 ° door hinges for improved access

Cylinder lock with key for extra cubicle security

B – kWh meter Modbus RTU with current transducers (non MID)

C – kWh meter Profibus (400 V SUPPLY ONLY) with current transducers (non MID)

D – kWh meter Ethernet with current transducers (non MID)

kWh meter pulse contacts in combination with A, B, C OR D kWh meters

A – Integrated 400 mm empty cubicle with plinth, cable plates INCLUDING mounting plate For your system equipment

B – Integrated 400 mm empty cubicle with plinth, cable plates and WITHOUT mounting plate For your installation cable management

A – Integrated 400 mm empty cubicle with plinth, cable plates INCLUDING mounting plate For your system equipment

B – Integrated 400 mm empty cubicle with plinth, cable plates and WITHOUT mounting plate For your installation cable management

Connect – Commissioning tool

Based on Control Techniques’ 25 years’ experience, Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance.

Machine Control Studio – Programming tool

Control Techniques’ Machine Control Studio provides a flexible and intuitive environment for programming new automation and motion control features

Diagnostic Tool

Diagnostic Tool is a fast and simple tool, which allows users of Control Techniques’ drives to quickly solve any error codes that the drive may show.

Drive Setup

Free access web pages provide ‘how-to’ videos, step by step guides and comprehensive technical manuals for your drive installation.